Steampunk jewelry tutorial photo

Date: 15.10.2018, 00:14 / Views: 65365
Закрыть ... [X]

Do you know what you'd like to ask? Great! To ask your question, just fill in the form below. If you have more than 1 question, please submit them separately, one by one.

Click on the links below to see what others have asked. To answer a question, click on the "add comments" link and submit your answer.

 
hi everyone! every time i make bracelets or necklaces they come undone and beads go everywhere even use glue. is there a special knot u have to use …


Hi. I'd like to spray Krylon Crystal Clear coating on some earrings made of copper to prevent tarnish, but they also have Swarovsky crystals on them. …


Hi I'm looking for a pattern for Fairy Lantern earrings. The picture was using 2 bicones and seed beads and bugle beads. The seed beads and small …

 
I love the Swarovski tassel earrings. How did you make them? Will you be posting directions? Absolutely gorgeous! Lisa


How can I make a bracelet with elastic cord that crosses over to another cord? I saw a bracelet that had elastique string but it was criss crossed …

 
Hello, I am making a pair of steampunk earrings out of watch face. I need something to glue to the back of the earrings so that I can add fish hook findings …

 
I purchased a packet of stones from a cable tv jewelry channel that also promotes its own Jewelry making supplies. I love Tourmaline and so when they …

 
What is difference between a foiled button and a transmission button on a Swarovski #3015 ravioli?

 
How do you connect very tiny chain? I have some very tiny chain that is soldered but I don't have any jumprings that are that small and I haven't …

 
Hello everyone, I am trying to make an elastic bracelet using gemstone beads and a bezel link connector. When I do the knots they seem to not hold …

 
I'm trying to make a necklace that has a string of marble slab beads with chain on either side. The only thing I'm not sure of, is how to connect the string …

 
The hole of my bead is too large for the headpin. Is there any technique I could use to keep bead on?

 
I was wondering if someone might be able to walk me through the process of cutting metal stamping blanks out of sheet metal. I understand it can be …

 
Where can I find the necklace and rhinestones to make a Sabika look-alike necklace??

Knotted Necklace

 
I have searched and searched the internet on techniques to make a necklace similar to the one pictured. I can't figure out how to knot between the …

 
I would like to spend less on buying earrings and save up by doing them myself. So, please, how do I go about that?


Just starting out. Need to know how to make earrings. What are the steps to do a finished pair. Thank you.

 
Hi, I tried my hand at using epoxy to make a focal the other day. It hardened up just fine, but left a skim of bubbles at the top that obscured the …

 
I need earring posts of sterling silver that has a flat or cupped circle at the end to glue or some how put a gem, cameo, or a stone onto. I have so …

 
Hello everyone, I am new to this website. I don't know if you all know each other already. Anyway, I've been making hair elastics, barrettes, and headbands, …

 
I am making necklaces and bracelets that have a strand or two of leather cord and want to position a few large hole beads on the cord. How do I get …

 
I am making a long necklace with plastic beads and light wooden beads. I would like the necklace to be about 32". I was wondering which string would …

Necklace

 
Hello! I made a partly-double strand beaded necklace (see pic) using stringing cable but the loop of cable between the final crimp bead and the jump …

 
How do I add a pendant to a necklace so it won't turn?

Wrapped Stone Bracelet


I'm looking to make cuffs like the picture and hoping to find a pattern for a macrame wrapped stone to put in a bracelet, so without the loop of cord at …

 
What kind of paint (or other method of coloring) can be used on a wire bracelet? At the moment, all I have is acrylic, which would chip off when the …

 
I want to make a bridal set that has a string of pearls/crystals with many headpin-based dangles and a center pendant. Is it OK to hang the headpins …

 
I am making a multi-strand gem bead bracelet. I am trying to attach a delicate version of a dog tag chain to the other two chains but I cannot use …

 
How do you attach a crimp coil to rattail cord? I am trying to make a necklace and have tried to use my crimping pliers and regular pliers to crimp …

 
When I put my necklace on the clasp/closure is in the back where it should be. Within minutes of wearing the necklace the clasp has shifted to the …

 
How do you attach a chain to a pendant if the chain is too small for jump rings?

 
Hi, I'm thinking of using recycled perspex pieces but some are scratched already and I would like a uniform matte finish. Was thinking about buying …

 
I attended a craft fair yesterday and I saw a very large, very light weight silver slider that was put on a scarf and hung around your neck with a pendant …

 
I have a unique carved pink arrowhead that I would like to protect in a open bezel and wish to use clear resin and harden it for permanent protection. …

 
Do most jewelry makers use sterling silver or gold-filled headpins? It increases the cost so fast, especially when designing a cluster of stones. …

 
I need pewter posts and backings to make allergy specific earrings. Can you accommodate or refer me to someone?

 
HELP! I have soldered a jump ring on to a PMC pendant but it looks bad. How do I remove the jump ring? I have used easy solder (silver solder and …

 
I am looking to buy magnet attachments for my Mom for her jewelry because she has arthritis and can not hook her necklaces or bracelets. I have seen …

 
Hi..I have been having problems with bracelets coming apart ( after I've given them as gifts!!) I've been using 2-3mm crimp tubes..just went to our …

 
How do I use a Tea Cone Clasp? I purchased it,some time ago, I was diagnosed with breast cancer, had double mastectomy and purchased lots of jewelry …

 
What is the simplest thing to start off with making that doesn't take too long and looks nice?

 
I have a learning disability and I have always wanted to learn how to make jewelry but a lot of people told me that it was going to be hard for me. …

 
I know how to make the beaded double-wrap bracelet, but I can't figure out how to make the bracelet wider using an additional row of beads (i.e. side-by-side …

 
I know how to ball one end of a wire, but after threading the bead on there, how do you ball the other with a torch?

 
When I buy Stretch Magic, I do not understand what thickness I should buy to make a stretch bracelet that will not stretch out. I bought.7mm and.5mm/.019 …

 
In a book I am ordering, the author refers to "transite". I am not sure what she is referring to? It looks like it is just clear stinging line. …

 
I have several old watch faces that I would love to make for presents for Christmas. My problem is that the faces do not have the ring or hook but a very …

Arty Oval Ring

 
Hi, I wanted to make a ring that looks like Yves Saint Laurent's Arty Oval ring that has textured gold tone and a molten finish. How or where would …

 
Any ideas for a Steampunk necklace using leather and metal findings?


I would like to know how to make a mid-width leather bracelet with wax cord wrapping. The wax cord is wrapped around the bracelet in certain areas which …


Hi! I would like to make lighter covers for the standard size Bic lighters. I need some free patterns (or even just a count of size ll seed bead …

 
What kind of closures can be used when making watches?

 
I have tear shaped beads that I want to string alternating for a necklace. When I string them the conventional way the beads flip both ways. …

 
If possible, could you please provide any information about "Tibetan Silver"? With Sterling now having precious prices and so many other products looking …

 
Should the size of a necklace clasp be smaller or larger than the largest bead on the necklace?

 
How can I know what I can put in the tumbler and with what tumbling material for a particular stone or metal? I need to know what I can clean in the …

 
I have a ring and I was told it was gold but it isn't marked with how many karets it is so does that mean it's fake? The only thing stamped in it was …

 
How to link (finish) ends of a crochet necklace or bracelet, without a clasp?

 
How to open a necklace with barrel clasp that is screwed too tightly. I have tried opening with Playtex Gloves, and at least five people have tried to …

 
I would like to know the best place to start learning how to design and make jewelry. If it is videos or books, can you recommend some? Any suggestions …

 
Does anyone use a dremel tool for their jewelry? Whether for glass or metals, what are the needed bits? I have a good five-speed dremel that came …

 
What is the difference between Silver and Sterling Silver Leverback Earrings? I am looking to buy some to make earrings and I cannot understand what the …

 
I have a number of charms that I bought to go on bangle bracelets. They turn all around the wrist... I have had four returned that I sold. Any ideas? …

 
I am using Beadalon crimps and wires. Doesn't seem to matter what size but I am using their guides. My problem is once I use the first second of the …

 
Hello, Can anyone tell me, what is a good way to package any necklaces I sell for shipping? Thanks!!

 
I have several buttons I would like to add to a necklace or a bracelet, the ones I am working with now are metal and have the metal loop in the back. …

 
Using the tutorials on this website, can I sell what I make online without getting in any legal trouble?


Hi, I was on the page 'How to make macrame bead bracelet?' and I tried to leave a comment with youtube tutorials but my comment didn't show up. Just …


How do I make my knots stay together when using elastic string for bracelets? I am stringing bead bracelets and the knots are coming apart very easily. …


How do I make the hook for the top of the earring so the other parts don't come off?

 
Hello, I have a few wide leather cuff bracelets and I would love to know how to attach some interesting trinkets to them. I have a flat square 3x3 …

 
I would like to make a floating necklace but am unsure as to what size crimp I should use. Also, should I use a crimp tube or crimp bead? Can anyone …

 
What would you recommend to drill beach glass so it doesn't shatter?

 
Have seen an amazing Chan Luu bracelet http://www.chanluu.com/Wrap-Bracelets-p/bs-2571webcorclomix.htm I would especially like to know how to change …

 
I would like to learn to make jewelry so I can make money. Do you enjoy this and is it frustrating trying to come up with a design?

 
I have some small-medium stones that I would like to use in my jewelry. Since they don't have any holes drilled in them, is there a way to make a cage …

 
Need to make a chain waist/hip belt for a friend... Any suggestions? Regards, Wilma

 
Good day! I am looking for magazines or websites on leather jewelry. I have searched and searched and the engine isn't giving me what I am looking …

 
I have tumbled many rough gemstones and now want to drill holes in them. I have purchased the drill press and bits but am having a devil of a time …

 
Hi there, I know this may sound odd, but I was making a bracelet using 22 ga jump rings. I am sorta new at this and am learning. The jump rings …

 
I have a problem with cabachons/pendants decorative side facing forward. Help!!!!!

 
How do I make a chainlink necklace so you can't see where it began or ended?

 
Probs with sticky spots underneath when resin piece comes out of mold... My casting is sporadically successful. I mean that even after ample time, I …

 
How do I work with jump rings for attaching charms to bracelets? Also can I just attach a charm with wire wrapping with memory wire? What about using slip …

 
Do you have any patterns or know how I can get them to make ankle wraps? They hook around your toe and go up the front of your foot and wrap around …


Hello and Help! I've submitted a question about free bead patterns for bic lighter covers. I haven't been able to find any patterns that fit into this …

 
I've recently made a necklace using long curved connectors between large beads. I used jumprings at each end between the connector and bead and it …

 
Where can I find a book about how to do different designs and how to actually start making necklaces and bracelets?

 
I wish to make some earrings from old stamps of our city's precious Christchurch Cathedral, which was devastated in our recent earthquake. I have seen …

 
I'm making earrings and want to hang strings of seed beads. How do I make knots that won't show and will still hold the beads?

This is Pam's Boiled Egg LoS Patina'd. See the below edit.

 
I can't get liver of sulphur to adhere to my copper. On my first try... chip form with hot water in a glass pan... immersed... then tried agitating …

 
I am interested in making bracelets for my daughters. The medical ID bracelet, the bracelet I want to make, has beads and two lobster clasps on each …

 
Which is the best clear drying glue for resticking gems in earrings, etc.?

 
Attached is a photo of a bracelet I would like to make. Do you know how to make this weave. I've checked all my macrame books, and I'm unable to …

Strung fused beads.


I have these beaded necklaces that look like the thread is baked right into them on the string. Is there a way these can be unstrung somehow? Thank …

 
I bought some strung jewelry beads at a thrift store. They were knotted, I believe. I went to cut them apart to use, but they won't come apart! Each bead …

 
I have read just about everything I can find on you. My question is: Are you still selling your jewelry online? If so what is your site address? …

 
What are the different types of stringing material and what are they used for?

 
How can I make sure my bracelets do not come apart? What can I use?

 
Would you recommend particular brand of pliers and cutters? If so, why? Do the cost of these tools vary greatly from one supplier to the next?


I would like to know where can I purchase large paddle backs for clipon earrings with loops for dangles. I can't wear pierce earrings but I would like …

 
Could you please guide me to some instructions on crimping techniques and crimp cover recommended sizes and application. Thanks, Meredith

 
Do you know how to make this style of bracelet? Can anyone help me with step by step directions on how to make this bracelet? Thanks!

 
Hi! I'm trying to use a thin, feminine chain with a delicate charm but the chain is so thin that it keeps falling thru the opening of the jump ring. …

 
I want to design my own hat pins/stick pins. But, I don't know where to get the basic stick with the push cover that goes at the bottom. Do you know …

 
I would like to make mommy bracelets. Where is the best place to purchase quality beads and supplies? Thank you


Hi. I've been seeing this bracelet and it's a bit too much out of my budget. I was wondering if you can offer a tutorial to help me recreate this …

 
Hi My name is Najah Gilmore and i am 20yrs old and i am from WestPhilly and i just would like to ask two quick questions. First one is how to make …

 
I am wanting to find a hobby first. I am a mom of 2 teenagers and they are out doing their own thing and I need something to help me deal with my empty …

 
Where can I find rhinestone/crystal slider like the one in the picture? Is that what it is called? I went to a bead shop and the woman who worked there …

 
do you post to the british isles? i hope so. thx

 
I'm trying to make a glass bead and shell multi-strand necklace and I just can't get it started.. HELP PLEASE!!

 
Would it be be legal, ethical and ok for me to print copies of free online projects, or projects that I have purchased to use in a class that I am teaching? …


In one of your tutorials you said you love your "magic crimpers" but I have not been able to find any crimpers that say magic on them. I have found "mighty …

 
i have three sets of painted fake pearl necklaces in varying colours... they belonged to my great grandmother - probably from the early nineteen hundreds. …

 
I would like to begin kumihimo braiding with beads. Any help in getting me going would be so great. Thank you, Imagrgma

 
Would like to make a long wrap around light weight leather bracelet with stones or beads (some not too many). It wraps about twelve times then ties or …

 
I make paper beads and want to sell them so what's best... Third party like Etsy or making my own online shop?

 
I have many pins from my elderly aunts and I would like to turn them into pendants to wear on a gold chain. Is this possible?

 
I've seen this really cool technique done on pendants and earrings but apparently I'm just not bright enough to figure it out on my own. Can you please …

 
How do I finish a pearl and leather necklace? I want the leather to end after the pearl is strung through without the typical knot. Thanks so much

 
I am trying to reproduce a handcrafted pendant made from oxidized copper. A beautiful picture was drawn on it with colored pencils, then sealed. So,I oxidized …

Photo I found of what I would like to do

 
I am a guitarist and I want to make a necklace to decoratively display a guitar pick made of stone. My dilemma is accomplishing this while at the …


I have a lot of large and medium faceted gems. I would like to put a whole or fastener on them to make a necklace. Is there a drill or what. Thank you …

 
I am making bracelets with stretch magic and the crimp beads seem to cut the cord making the bracelet break. Is there a better way to secure the ends with …

 
I am looking for a chart for necklace length for children. I need to make a necklace for a 5 year old girl. Can you please help me out?

 
I just received some brass cabs and half marbles to glue into them and was wondering how I am going to attach it to the jump ring when the cabs do not …

 
I saw several jewelers at an art show that had their smaller, more expensive items displayed in plexiglass cases. The artist said they made them. Just …

 
Where can you order small "dumbell" jewelry tags, say about 1,000?

 
When I make a 3 strand necklace with a 3 strand clasp do I have to have 3 different lengths of thread of wire to make it lay flat?

 
Does anyone know whereyou can get the large pearls that have a hole large enough to string it directly on a 1.5 to 2 mm leather cord??? Also, anyone …

 
Hi I would like to know how to clean jewelry that is made from seed beads. Any help would be very much appreciated. Thank you very much.

 
I sell jewelry at my hair salon but I am having trouble with my costume silver jewelery turning gold so I have to polish it back to silver color. Is there …

 
i'm just thinking about making jewelry and would like to know where should i start.it is something i would really like to do

 
How do I make a multi-chain bracelet? I seem to be having trouble getting the chains around the same length. One seems longer while the others seem …

 
When I put the crimp cover over the tube when I use my tool to close it it never looks finished. It is either uneven or there are dents in the crimp cover, …

 
I made a necklace of alternating rice FWPs and 3mm gold filled seamless rounds. The ends are a small lobster claw on one end and a.64x5mm closed jump …

 
I've just started making jewelry and made a bracelet for my mother. She loves it, but can't wear it because the color from the beads is bleeding off onto …

 
I have an endless supply of antlers from various wild animals. Does anyone have any insight on making jewelry out of these horns?

 
I have a beautiful charm-type necklace that I would like to also wear as a bracelet. The charms and beads run exactly the length I would want the bracelet …

 
My necklace is a pearl three strand that I am re-stringing. I re-strung each strand on nylon string which I am not so sure about now because it does its …

 
I need a design method (simple and fast) for extending some necklaces approximately 3-5 inches. Any ideas on what to use to extend so it fits in with beaded …

 
I don't understand, I am using a crimping bead and a crimp cover. But I have gotten a few bracelets returned where one end of a toggle just rips off! …

 
Hi, I just recently found your site and love it. My question is: In an already complete toggle clasp bracelet, what would be the reason for the …

 
How can I demagnetize beads to use with metal findings? I've tried the small ceramic demagnetizers but no success. Can you help?

 
Hi there, I'm really interested in taking a jewelery course and am having trouble finding the right school. I'm looking for part-time classes once …

 
I just bought one of those cheap cord and clasp necklace kits from Michael's. I have never made any jewelry before and am just trying a very simple project. …


I want to create a 50's inspired multi-strand necklace using a brooch and 2 to 3 pearl strand necklaces for my wedding day. Most vintage inspired necklaces …

 
I work with seniors and we make stretch bracelets and rings. I would like to teach them something different but something not to hard for them to do. …

 
I would like to have instructions on how to make a multi-strand illusion necklaces. How far apart are the beads on each strand? What are the strand lengths? …

 
Do you have any tips on what to use or how to glue leather into a 70mm curved tubed silver piece? The leather fits snugly into the silver tube but the …


What kind of machine do you use to put initials on Shell Pendants? It's kinda like engraving but it's not. It may be something you hook up to a computer, …

 
Hi, Can someone please help me to learn how to make my own clasp?

 
My best friend's son is starting religion classes and I would love to make him his rosary. Not being Catholic I haven't the foggiest idea on how to set …

 
I have an antique pearl bracelet that needs restringing to make it fit. What do I use to restring? Thank you Andrea

 
Hi, Can anyone recommend a stringing material for heavy silver Bali beads that would be flexible without kinking? Thanks Sue

 
Hi, Can anyone recommend a stringing material for heavy silver Bali beads that would be flexible without kinking? Thanks Sue


I'm making some Halloween jewelry to sell and the black AB glass beads keep oxidizing. How do I prevent this from happening? I had a complaint last …

 
I have a reel of snake chain and some separate ends for snake chains but don't know how to fasten the ends onto the chain.

 
I want to learn how to make jewelry that you take like a leaf and dip it in some type of liquid copper. It is not fired. Then it is finished with some …

 
I have larger-than-average wrists and have always had difficulty finding bracelets that fit properly. I have decided to make my own and would like …

 
Hi, We had a country festival in our region on July 5th and I wanted to create a Bolo Tie with beads. Using a Cabochon, I wanted to have put some …

 
Which solder do I use to add a large bezel around a pendant? Which solder do I use to add a bezel around a stone which has silver underneath? …

 
What drill/machine should I use to make clean holes in thick cardboard? I need holes that are 2mm and 4mm..

 
What is the best way to to remove backings of pins and earrings? I need a flat surface to work with - and need a tool to remove the backings of pins …

 
I saw a resin mold for a bangle online, and am thinking of purchasing it. I'm wanting to use it to create polymer clay bangles. Are polymer clay …

 
I have some lovely old brooch/pins I wear my hair up and would love to use them on barrettes hair pins etc. Please tell me best method of removing …

 
I'm a beginner in bracelet making. I'd like to know what size crimp bead to use in making bracelets with small to medium size beads?

 
I have a new tumbler and the jewelry is coming out black.

 
Hello! I would like to know if there is any sites that show step by step (easy) on how to bezel a rivoli? I am having so much problems doing this. Thank …

 
Has anyone successfully drilled a small hole into glass? If so, what drill bit/tool did you use? I have round, flat glass pieces about l/8 inch thick …

 
I'm trying to open, and close, to no avail, a link from a purchased chain. I want to re purpose the chain into earrings. My heavy -duty cutters can't …

 
I love your site and will continue to use it. I am looking for instruction on how to add a lobster claw extension chain to my bracelet. I had purchased …

 
I done a couple of bead projects. I am just a beginner and my projects had flaws. What are good project for a beginner? Thanks

 
I purchased a whole bag of cats eye cabs. But lo and behold, I didn't pay attention when ordering and they all are undrilled. They range in size …

 
I have been asked to make beaded/crystal brow bands for horses, but I am not sure what the best way to attach them is? I have tried gluing but the brow …

 
I know that making certain types of maille requires certain size jump rings in order for the pattern to work. Is there any simple method or any chart …

 
I am wanting to start making Altered Art Jewelry, specifically charm bracelets, but I need to find out what pictures, artwork, printed materials, etc that …

 
I am trying my hand at some resin jewelry and need to ask about coloring. I have some ideas of coloring but am not sure that these are items I can use …

 
I have bought 3 different kinds of wire, I was told that it was the correct wire to make illusion necklaces. But none of the wire I have bought is the …

 
How do you make a bracelet or necklace with shell pieces? I have all the stuff to make it, I'm just not sure how to make it.


Hello! I am looking for help creating a bead on leather wrap bracelet! I've recently been seeing this design for a bracelet but the prices are way …

 
I am part of a not for profit organization and we were hoping to sell bracelets as a way to raise money. We thought it would be a really good idea …

 
Hello, I live in San Diego CA, and I would like to start looking into making nameplates, necklaces, and also earrings. Any help? Thanks so much.

 
Dear Christine: I have a bunch of very pretty hand painted ceramic beads from India, all with pretty large holes, 1/8". I am trying to figure out …

 
Would you please send me a list of tools that I will need to learn and make beautiful jewelry?

 
Help for a first time jewelry maker! I would like to start selling my bracelets. I also want to make many at one time. What size should I make them? …

 
hello, my name is Mary and I don't know how to make jewelry. I am learning. I went and bought a lot of beads to start. I'm looking at books and …

 
I just want to know how do you end off loom work? I have a small loom and did some beadwork on it but I just knotted the strings and strung it back …

 
I found your website through a video I watched on youtube about a bracelet sizer. I'm sure the video said I could download the template on here. …

 
I have a silver ring with a set stone, and the ring became bent. What is a good way to straighten it without risking the setting?

 
I have this image of a design in my head but I'd really like to know how to transfer the idea in my head to a pierced piece of sterling silver. I'd …

 
I am making a bracelet which is double stranded so uses 2 pieces of the cord. Knots do not work. I can pull them apart. How would using crimp tubes …

 
What are some methods and patterns for making earrings using gemstone chips and nuggets?

 
What beads, clasp types and stringing materials are best suited to masculine jewelry. Most beads and beaded pieces feel feminine. Answers- …

 
Hi -- I looked at your blog, which explained oxidizing with liver of sulfur, and I was looking for the follow-up article you mentioned about tumble polishing. …

 
I have been making pendants from sterling silver wire and am attaching them to a chain. The pendant seems to always turn backwards when I'm wearing …

 
I took a class in jewelry making and I learned how to solder. I set up my own equipment, but my problem is that the solder never seems to flow. …

 
I am starting my new small business making women's handmade jewelry, but I am facing a small problem and it's affecting my satisfaction to the end result. …

 
Can the engraving be changed on an antique 14k signet ring? Answers: None yet. Can you answer this question? Would you like to comment? …

 
I made a bracelet from 6 mm Swarovski crystal cubes and didn't use any spacers but the bracelet doesn't curve. Any suggestions? (1) ss bead (5) jet …

Safety Pin Stretch Watch - (still pending approval from owner - see below)

 
Question: Does anyone have the basic intructions for making watches with beaded safety pins strung on stretchy string? Answers Note about the …


Do you have any ideas for jewelry made using broken chinaware patterned pieces? I have recently been combing an antique dumpsite and found many pounds …

 
Question: How do you protect yourself when making jewelry and using craft glue? When I use craft glue it upsets my stomach and I might get a slight …

 
I'm having trouble in my visual design class. We are making jewelry and I am making a beach-themed bracelet. I don't know how to tie the bracelet to finish …

 
How do you join the two pieces of the flat chain when creating a floating necklace with out a clasp? Are there special crimps for chain?


I collect cone shaped sea shells. Many of the small ones would made nice ear rings. What would be the best way to attach them to an ear wire? Thanks! …

 
Hello! I crimped #2 crimp beads on Beadalon 0.46mm 7 bead stringing wire and I could not make it hold. I did everything as instructed, but my crimping …

 
What colors blend together to make a crystal bracelet?

 
I'm making a necklace using a large Swarovski stone as a drop and pearls as the main beads but the wire is breaking where it has to be twisted at the large …

 
Hi, I have been trying to make one of the beaded leather wrap bracelets, however am having trouble getting started using your instructions. My first …

 
Could you please tell me where to find a bead size chart so I know what sizes to buy for certain projects? I am prettty new at beading so it sure would …

 
How do you make a two (or more) strand bead necklace and keep them twisted? Mine just come untwisted. I would love to hear from you. Thanks, Judy …

Letter Stamps

 
Question I am trying to letter stamp silver charms without them looking too messy and without the imprint of the letter coming through on the other …

 
Question: Where can I buy sterling silver and silver plated findings and chain that will not tarnish? I'm tired of my silver turning yellow in a …

 
I am looking for a course in jewelry-making and plan to sell my work after. What type of part time course would suit me best?

 
I would like to know how to string an object with no holes for a pendant. How can your wrap a stone or object that does not have holes? I have seen …

 
I've been using open jump rings. I try not to open them any further than I have to. But when it comes to closing them, I can never get the gap completely …

 
I have some tear drop beads and am having trouble stringing them where they look good and professional. Would welcome any help and suggestions.

 Not rated yet
When placing a earring dangle on the ear wire should you face the subject of the dangle facing forward or to the outside facing left or right? I'm speaking …

 Not rated yet
Can anyone tell me where to purchase the type of stones and settings used to make Sabike /Mariana type jewelery? I see local people making it but can't …

 Not rated yet
Does anyone know how to add beads to a metal expansion stretch band (like a watch band) without using safety pins?

 Not rated yet
Hello Everyone, I have started a new project and I'm having some serious difficulties. I'm bending spoons with a spoon bender and you have to press …

 Not rated yet
I am new to making jewelry and using a wire jig looks like something I am going to enjoy, but I was wondering what you would recommend as the best overall …

 Not rated yet
I need to know how to make several circles using pearls and then connecting each one by looping each circle through each loop and make a necklace of pearl …

 Not rated yet
Hi, I just need some advice on what to buy to get started. Im going to be making jewelry as a hobby. But,I'm just overwhelmed by all the stuff online. …

 Not rated yet
What type of sterling silver bail would be the best kind to use for a necklace that only had a jump ring before that kept pulling open and finally resulted …

 Not rated yet
I am having trouble keeping a shell necklace tight while putting on a different clasp. Are there any suggestions?

Swarovski Fancy Lemon Crystal

 Not rated yet
I can't find a bezel or setting to fit the new Swarovski Lemon Fancy Crystal Stone that is 19mm x 12xmm. It's almost a pear/teardrop shape and is wider …

 Not rated yet
Is a 6mm white gold chain 22 inch heavy and very big?

 Not rated yet
When you are making a necklace and you have a large bead with a hole through the centre, how would you string it onto the chain if the chain is too thick …

 Not rated yet
I made a necklace with 10mm twisted jump rings and added two 6mm dangles to it. Then, I hooked them together with 8mm jump rings until I had the size necklace …

 Not rated yet
Where I can find a tutorial on how to do SPIKE Weave Jewelry?

 Not rated yet
They are 2 inches long, thin, hard but bendable wire with a circle at one end?

 Not rated yet
Yes, I love your website. I always learn or find something interesting here. Previously you had a video on how to make a crochet seed bead bangle …

 Not rated yet
I have a necklace I made that has beads inlaid in metal with a mix of chains linking between each bead. The beads keep swivelling and twisting backwards. …

 Not rated yet
I am interested in making some jewelry like these Zelda items. I have several ideas but am interested in if someone can tell me the "best" way to go about …

 Not rated yet
How do you make silver rings larger without taking to a jeweler? My size has changed.

 Not rated yet
I was at a fair and bought a scarf with a big silver heart slider on it and litte balls on the sheredded edges. It is beautiful!!!! I want to …

 Not rated yet
Can you add colored sheet metal media to a resin solution bracelet mold? This would be cut to size and probably rolled for a different effect? The …

 Not rated yet
How do I make sure my crimp is secure for the neclace? A couple of mine have opened up after wear, I would not want to sell one like that...

 Not rated yet
I have only seen one size clam shell and it is not sturdy enough for heavy beads. Are there other sizes available?

 Not rated yet
I recently started learning how to make resin jewelry and have a real passion for this new technique but I am having trouble getting my pieces to cure …

 Not rated yet
How do I stop a light weight necklace from shifting/turning around on my neck? I am always having to put the clasp back in place at the back.

 Not rated yet
I have some natural "flaky" stones I want to put some covering / sealant on without changing the shape of the stone. Can I just brush on resin to cover …

 Not rated yet
How do you keep the wire from coming off a jump ring

 Not rated yet
I used to make bracelets with this simple pattern, but I can't remember how to do it. It's a simple thin bracelet that is a thin cylindrical shape with …

 Not rated yet
What gauge of wire do you recommend for wire wrapping beads and stones? I have just started learning wire wrapping and find it fascinating but too …

 Not rated yet
I have some 14K gold beads that I strung on a Kremets chain. After many years on this chain the beads have a little magnetism in each hole. How can …

 Not rated yet
I think I saw somewhere that you have a video tutorial on using wire guards. I can't seem to find it and would like it again. Thanks!

 Not rated yet
I want to remove the stones and replace with precious stones so how do I remove miniature zircon stones from a sterling silver individual unit setting? …

 Not rated yet
I bought some braided leather. Lots of you deal with string, cords ropes... all the time, how do I keep the ends from fraying? Also,how do I attach …

 Not rated yet
I have 4 strands of beads I want to attach to a ribbon to form the closure for the necklace. The 4 strands are braided together. How do I attach the …

 Not rated yet
Hi! I recently started looking for jewelry to purchase for my bridesmaids and came across this gorgeous set of earrings...http://www.etsy.com/listing/91073532/pink-gla …

 Not rated yet
How do I prevent my bracelet from getting loose when I use a square sliding knot even when I pull the cords tight? Thanks!

 Not rated yet
I'm decorating a pre-made leather bracelet blank with brass stampings and wanted to know what type of glue would be best as well as what are some other …

 Not rated yet
How do I put a crimp onto a faux suede thong without the thong snapping? The ones I have are folding crimps. Have I got the right ones? If they are …

Soldering Bronze Or Copper Jump Rings Not rated yet
I have tried soldering silver jump rings...without much success...but what do you do with antique bronze or copper jump rings?

 Not rated yet
I have cuff link blanks that are 11mm in size. Should the cabochons be the same,bigger or smaller? Many thanks.

 Not rated yet
Where or how could you use an 8 inch stick pin in jewelry making?

 Not rated yet
I used the circle and bar that came together but the bracelet keeps falling off. I bent the circle with pliers to make it smaller yet it still keeps …

 Not rated yet
Your site...different and needed! Thanks!

 Not rated yet
When the letters )ask) is engraved on gold jewelry along with 10kt what does this mean?

 Not rated yet
I have a long necklace with toggle clasps that I need to convert into a "multi strand looking" bracelet. How do I do that?

 Not rated yet
I am using faceted roundels that are flat on either end, which won't let the wire bend smoothly. If pulled tight through a crimp - it kinks - if I a leave …

 Not rated yet
I have been making metal chain jewelry but after I have finished it the piece starts to oxidize. How do I stop the pieces that I make from changing …

 Not rated yet
I made a necklace and bracelet set for my sister. I am just learning the trade, so I would appreciate any help you can give. After my sister wore the …

 Not rated yet
I am making a bracelet out of 14g. wire and every time I put it on my wrist it is bendable. What do I do to make it hard enough not to bend?

 Not rated yet
Do you have a easy pattern of Rasta bracelet?

 Not rated yet
Hi There, I'm after extra long spiral tubes (silver) for jewelery making. The most I've find on the Net are 20mm - 30mm and I'm after ones about 80mm. …

 Not rated yet
I'm making a bracelet for my best friend but I don't know what I should make. Any Suggestions?

 Not rated yet
After balling one end of a wire, how do you ball the other without damaging the bead?

 Not rated yet
I'm working with a linen twist and need to know how to finish the ends cleanly before attaching the clasp. I have a rectangular crimp that will be …

 Not rated yet
I am having a hard time closing crimp bead covers properly. The cover either does not close all the way so that part of the seam shows open or the …

 Not rated yet
What can I do so the silver plating won't come off and my jewelry turns to copper?

 Not rated yet
I am making a bracelet and attaching beaded alphabets for my daughter. However, they keep twisting and facing backward. What can I do?

 Not rated yet
I read some where many years ago that there was a coating you could put on your beads to keep them from shattering if they hit the ground. Does anyone …

 Not rated yet
I have made a beaded rosary by stringing the beads on 19 wire. Now there is a 1/2" gap because I did not pull the wire tight enough or it has stretched …

 Not rated yet
I've seen some rings with sea shells applied but they don't show the underside so I can't see how they are made. So, can I just attach a seashell to …

 Not rated yet
I was at an art show and saw a sterling silver chain necklace that tied in the front. The ends had pieces of polished shell or sea glass or semi-precious …

 Not rated yet
How do I make a fussed copper chain? Do you have a video showing how?

 Not rated yet
Where can I buy a 20mm x 20mm (4,6 or 8 prong) square ring mount setting?

 Not rated yet
How do I make my logo into jewelry? Is there a place that I upload my picture and they will create a stamp?

 Not rated yet
How do I make a simple pair of earrings out of waste materials in home?

 Not rated yet
I want to know how to attach stones such as Agate to leather wristbands...such as hair on hide...am I supposed to put a rivet in the leather and glue the …

 Not rated yet
I want to make long necklaces with the beads an inch or so apart and the thread visible. What thread is recommended and what's the best way to secure …

 Not rated yet
I have bought several pendants that are quite heavy. The bail is on the back about 1/4-1/3 of the way down. No matter what type of chain or stringing …

 Not rated yet
How do you stop silver-plated chains from turning color?

 Not rated yet
I have over a dozen bolo ties which I would like to change into pendants. Some are sterling silver, others minerals, both mounted and flat, several …

 Not rated yet
Can the foil or coating of crystal or rhinestone be repaired?? Thanks in advance to anyone who knows!

 Not rated yet
I made a coin pearl necklace 16" long with a seed pearl in between. When I put on this necklace it is not laying flat on my neck. Do I need to add …

 Not rated yet
I am making a necklace with leather cord. How much extra cord do I need to allow for the sliding knots?

 Not rated yet
Hello, Is there any other way to place hand-written notes (taken from a card or letter) into fine silver pendants? We currently use Photopolymer …

 Not rated yet
Instead of using white glue to coat a picture when making a resin pendant, can I use the self-sealing laminate sheets?

 Not rated yet
How do you attach vintage paper onto a brass cuff bracelet and finish it? I see these everywhere and I know where to get the cuffs but I can't figure …

 Not rated yet
I'm not sure if you can help me out with my question but I thought I'd try. I'm thinking of buying a stainless steel and ceramic chain link bracelet …

 Not rated yet
Hi, I am really hoping that you could help me. I desire to start creating jewellery & would like to use acrylic/resin. What I need to know though is …

 Not rated yet
I have my country music singers guitar pick and I would like to have it encased in a sterling silver or other metal holder so I can wear it on a chain …

 Not rated yet
I am making a hemp necklace and as I am tying the knots it is twisting and making it difficult to keep going, is that suppose to happen?

 Not rated yet
The button I have has a clasp on the back. What can I put on the back of the button so I can add chain?

 Not rated yet
I am making earrings for basketball wives and noticed that the gold plating may tarnish after wearing it a few times. Is there a solution that I can …

 Not rated yet
Does a video exist that shows you how to do hand coiled loops. Also, what gauge wire would you use to wrap a 24 gauge wire for the loops? Any …

 Not rated yet
I have seen somewhere,a bracelet made with a very fine crochet hook with wire and beads with a fastening with 3 holes on either side of the clasp. The …

Shell Abalone Nugget Beads

 Not rated yet
How do I keep shell abalone nugget beads from flipping over when stringing them on a necklace?

 Not rated yet
I have a watch and it seems to lose over 1 hour overnight if I wear it; yet if I take it off it keeps perfect time this does not happen with any of my …

 Not rated yet
I'm looking for a mold to make 1 inch or so faces for Victorian-style brooches to make it look like women with big hats on it when I'm done.

 Not rated yet
What are the safety aspects in the jewelry manufacturing process at various stages?

Large Neck Jewel

 Not rated yet
Hi, I am not too sure how this neck jewel can be made with beads, there are a lot of reviews using neck rings but this is confusing me a lot more as they …



Похожие новости


Wedding gown designers philippines 2018
Evelyn lozada engagement ring 2018
Friendship bracelets on wrist 2018
25 beautiful starburst nails with tape 2018
Quinceanera dresses coral with gold 2018
Living room color theme 2018




ШОКИРУЮЩИЕ НОВОСТИ